There are mainly the following ways of the matching of capacitor touch screens:

G+G, G+P, G+F The fit method: This classification method is mainly based on the material and structure of the touch screen. Among them, "G" represents the glass, "F" represents Film (film), and "P" represents another material or structure (but it is not explained in detail in this context). For example, the capacitor screen of the G+F structure, the first layer is surface tempered glass, and add a layer of Film film material.

Full fit technology: In the LCD touch screen, the full fit technology is to fully fit the panel and touch screen in a seamless way, and there is no air layer between the display layer and the touch layer. The reflection between the glass makes the display screen look more transparent and the display effect is better.

OGS technology: This is a full -fit solution that is mainly used on the LCD capacitor touch screen. It integrates the touch layer and the protective layer glass together, and the ITO (oxide tin) conductive layer is placed on the inner plating of the glass, and directly coated and the lithography on the protective glass, thereby saving a piece of glass and one -time fit to make it to make it to make it fit, so that one -time fit, so that one time is fitted, so that one -time fit to make it fit, so that one -time fit, so that one -time fit, so that to make it fit at one time, so that one -time fit to make it fit, so as to make it fit at one time, so that one -time fit, so that one -time fit, so as to make it fit, so that one -time fit to make one fit, so that one -time fit, so that one -time fit, so as to make it fit, so that one -time fit, so that one -time fit, so as to make it fit, so that one -time fit, so that one -time fit, so as to make it fit, so that one -time fit, so that one time is fitted, so that one time is fitted to make it fit, so that one -time fit to make it fit, so The LCD touch screen is lighter and reduces cost.

Ultraviolet curing resin fit method: In this method, first evenly apply ultraviolet curing resin on the fitting surface of the first board as a bonding layer, then fit in a vacuum environment, and finally remove the vacuum environment. UV light radiation is fully solidified to the adhesive layer, so that the first board body and the second plate are firmly fit together. This method is suitable for the fit of large -sized plates, which can avoid bubble problems. Because of a uniform coating method, it can accurately control the amount of ultraviolet curing resin, so that the thickness and stress of each area are quite uniform.

The above are common fitting methods for capacitor touch screens. Each method has its characteristics and applicable scenarios. In practical applications, a suitable fit method is needed according to specific needs.

website:https:m.rrfw.com.cn

Tel: (86) 755 83952292
E-mail: sales@eurotech-lcd.com